- Casio G-Shock x Chari & Co collaboration
- Limited to 200 pieces in Germany and Austria
- Special packaging
- GA-500 K-3AER (GA-500K-3AJF)
A light-emitting diode (LED) is used to illuminate the watch face.
Shock-resistant construction protects against impact and vibration.
World time function
Displays the current time in major cities and specific areas around the world.
Stopwatch function - 1/100 sec. - 24 hours
Elapsed time, split time and final time are measured with 1/100-sec accuracy. The watch can measure times of up to 24 hours.
Timer - 1/1 min. - 1 hour
For fans of precision: the countdown timers help you to remember specific or recurring events by giving off an audible signal at a preset time. The time can be set to the nearest minute and up to 1 hour in advance.
5 daily alarms
The daily alarm reminds you about recurring events with an acoustic signal at the time you have set. This model has 5 independent alarms for flexible reminders of important appointments.
Each time you stop the alarm, it sounds again after a few minutes.
Button tones on/off
The button tones for using the mode button can be turned off. This means that the watch no longer beeps when switching from one function to another. Preset alarm or countdown timers remain active when the button tones are deactivated.
Hand Moving Function
With a push of a button, hands are moving and permit a free visibility of functions like stopwatch or date.
Once set, the automatic calendar always displays the correct date.
Times can be displayed in either a 12-hour or 24-hour format.
The tough mineral glass resists scratching.
Resin case / Resin band
Synthetic resin is the ideal material for wrist straps thanks to its extremely durable and flexible properties.
3 Years - 1 Battery
The battery supplies the watch with sufficient energy for approx. three years.
Water resistance classification (20 bar)
Perfect for free diving without scuba gear: the watch is water resistant to 20 bar / 200 metres. The metres value does not relate to a diving depth but to the air pressure used in the course of the water resistance test. (ISO 22810)
Dimensions (H x W x D)
57,6mm x 48,9mm x 17,1mm
approx. 75,0 g